Featured Product - New

15 Item(s)

Grid  List 

  1. Universal Danik Hook

    Universal Danik Hook

    Quality Composite, Danik Hook, NO KNOTS! Adjustable, slide anchor system Quick Release Non-Corrosive Material Adapt from 3/8” – 7/16” Rope Integrated Ring for Rope / etc. Lifts up to 500 lbs. Under Laboratory Conditions Boating, Camping, and Many General Uses The line slides freely when holding the lever down. When released, the unique mechanism grips the line securely Easy to Use, Knot less Boat Anchor System- Holds 230kg! ELIMINATES HAVING TO TIE OFF WITH A KNOT. GRIPS ROPE TIGHT AT THE DESIRED LOCATION EASY TO USE- Simply attach one end of the line to your anchor and the other end through the line passage in the Danik Hook. The anchor line slides freely through the passage when the Danik Hook lever is pushed down, but is held firmly in place when released. GREAT FOR ALL OUTDOORS- Perfect for boating, fishing, camping, 100’s of uses only limited to your imagination. The Dank Hook is extremely versatile, having countless applications – Marine, Recreational or Industrial. Learn More
    USD$29.00
  2. The Tackle Table Box Fishing Boating Accessory

    The Tackle Table Box Fishing Boating Accessory

    FEATURES OF THE QUALITY Down Under MADE TACKLE TABLE! - Chopping Board - Bait Board - Tackle Tray - Knife Slot - Pliers Slot - Foam Edging - Drink Holder The brand new way of storing your fishing equipment: The Tackle Table was designed with the sole purpose of enhancing the fishing experience, by removing the annoying bits! Your time shouldn't be taken up by walking back and forth, retrieving items that you are constantly using - or losing! Simply fill The Tackle Table with everything you need, and fish for hours without trips back to the car. Tackle Table takes a 15L Bucket. Easy attachment on your Rod Holder Sits on any flat surface Learn More
    USD$30.00
  3. Stainless Steel Danik Hook Slide Anchor

    Stainless Steel Danik Hook Slide Anchor

    Stainless Steel Danik Hook NO KNOTTS! Adjustable, SLIDE ANCHOR SYSTEM ITEM DESCRIPTION- Danik Hook, in Stainless Steel, from Slide Anchor ELIMINATES HAVING TO TIE OFF WITH KNOTS. GRIPS ROPE TIGHT AT THE DESIRED LOCATION. EASY TO USE- Simply attach one end of the line to your anchor and the other end through the line passage in the Danik Hook Stainless Steel. The anchor line slides freely through the passage when the Danik Hook lever is pushed down, but is held firmly in place when released. GREAT FOR ALL OUTDOORS- Perfect for boating, fishing, camping, 100’s of uses only limited to your imagination. The Dank Hook is extremely versatile, having countless applications – Marine, Recreational or Industrial. PRODUCT WITH VALUE- Holds up to 3628Kg. Tested under laboratory conditions. Made from scratch resistant Stainless Steel. Adapts from 3/8" – 5/8" rope with integrated ring. 100% Polished Marine Stainless Steel, Integrated Ring for your Bouy Line Learn More
    USD$45.00
  4. Johnson Evinrude Outboard Oz-Hydrofoil Suits 8-35HP

    Johnson Evinrude Outboard Oz-Hydrofoil Suits 8-35HP

    Oz Hydrofoil Performance Points: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds -Proudly Manufactured in Australasia from Quality strong Marine Grade Aluminium -Designed specifically to suit each model outboard -Stainless bolts, nuts & washers included with Hydrofoil -Oz Hydrofoil is bolted on-top of the outboard cavitation plate -Gloss Powder Coated Plate colour matched to the outboard -Comes with easy installation instructions & support -No Welding Needed -Quality Tested and Approved -Well proven product with thousands sold worldwide -Best Performing Hydrofoil on the market guaranteed! -Gloss Black, Grey, White, Silver colours in stock Note: Let us know what colour Oz Hydrofoil you want on the order details or Ebay message. If no message is sent regarding Hydrofoil colour we will post the standard colour. · This Oz Hydrofoil suits Johnson Evinrude Outboards Below: · 8 HP all years · 9.9 HP 2 Stroke 1974 & Newer · 15 HP 1974 & Newer · 8, 9.9 & 15 HP (4 stroke) 1995 & Newer · 15 HP E-Tec H.O. 2011 & Newer · 20 HP 2 Cyl, 1984-97 · 25 HP Commercial 1993 and Newer · 25 HP 2-3 Cyl. 1984 and Newer · 25 HP E-Tec 2009 and Newer · 30 HP E-Tec 2009 and Newer · 30 HP 2 Cyl. 1984 and Newer · 35 HP 2-3 Cyl. 1976 and Newer If this Oz Hydrofoil listing does not cover your model outboard please see our other Oz Hydrofoil listings or advise us what model outboard you require a Hydrofoil for. Learn More
    USD$75.00
  5. Johnson Evinrude Outboard Oz-Hydrofoil Suits 40-60HP

    Johnson Evinrude Outboard Oz-Hydrofoil Suits 40-60HP

    This Oz Hydrofoil suits Johnson/Evinrude Outboards Below: 2 and 4 Stroke motors including Etecs. - 40hp (2 cylinder) 1984 & Newer - 48hp 1987-1996 - 50hp 1975 & Newer - 60hp (2 cylinder) 1980-1985 - 40-50-60hp etecs Oz Hydrofoil Performance Points: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds -Proudly Manufactured in Australasia from Quality strong Marine Grade Aluminium -Designed specifically to suit each model outboard -Stainless bolts, nuts & washers included with Hydrofoil -Oz Hydrofoil is bolted on-top of the outboard cavitation plate -Gloss Powder Coated Plate color matched to the outboard -Comes with easy installation instructions & support -No Welding Needed -Quality Tested and Approved -Well proven product with thousands sold worldwide -Best Performing Hydrofoil on the market guaranteed! -Gloss Black, Grey, White, Silver colors in stock Note: Let us know what colour Oz Hydrofoil you want on the order details. If no message is sent regarding Hydrofoil colour we will post the standard colour. If If this Oz Hydrofoil listing does not cover your model outboard please see our other Oz Hydrofoil listings or advise us what model outboard you require a Hydrofoil for. Learn More
    USD$115.00
  6. Johnson Evinrude Outboard Oz-Hydrofoil Suits 70-140HP

    Johnson Evinrude Outboard Oz-Hydrofoil Suits 70-140HP

    Suits Johnson Evinrude Outboard Motors 70 thru to 140 Horse Power 2 & 4 Stroke motors including Etecs Oz Hydrofoil Performance Points: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds -Proudly Manufactured in Australasia from Quality strong Marine Grade Aluminium -Designed specifically to suit each model outboard -Stainless bolts, nuts & washers included with Hydrofoil -Oz Hydrofoil is bolted on-top of the outboard cavitation plate -Gloss Powder Coated Plate color matched to the outboard -Comes with easy installation instructions & support -No Welding Needed -Quality Tested and Approved -Well proven product with thousands sold worldwide -Best Performing Hydrofoil on the market guaranteed! -Gloss Black, Grey, White, Silver colors in stock Note: Let us know what colour Oz Hydrofoil you want on the order details If no message is sent regarding Hydrofoil color we will post the standard color. - If this Oz Hydrofoil listing does not cover your model outboard please see our other Oz Hydrofoil listings or advise us what model outboard you require a Hydrofoil for. Learn More
    USD$130.00
  7. SMALL Slide Anchor Shore Spike STAINLESS STEEL

    SMALL Slide Anchor Shore Spike STAINLESS STEEL

    SMALL Spike Stake SUITS -boats up to 22 feet. STAINLESS STEEL - looks smart next to gel coated/fibre glass boats Perfect for shallow water anchoring. Holds boat securely, very reliable. Use on sandy beaches where thier is nothing to tie your boat off to. Easy to use in sand and mud. Slide Anchor's Shore Spike is the perfect tool for securing your boat in your favorite beach spot, or even off rocky or shale shoreline. Just drive the Shore Spike's rubber dipped tubular handle downward to deliver the spike blade into the shoreline, and then tie your boat off to the lower rig. When it's time to push-off, the Shore Spike comes out as easily at it drives in - just drive the handle upward. This 304 Stainless Steel Spike looks the part, and is protected from corrosion, The Shore Spike's has a open tubular handle that won't trap air, water, or debris for hassle-free use in shallow water. The top ring is for a line and buoy. Rubber-dipped handle Quality 304 stainless steel Also designed for use in shallow water Shore Spike video link: http://www.youtube.com/watch?v=3jD9IDYGY7k INCLUDES FREE BLUE, GREY OR RED EASY STORAGE CANVAS SLIDE ANCHOR BAG! Learn More
    USD$150.00
  8. Auxilary Outboard Bracket up to 15HP

    Auxilary Outboard Bracket up to 15HP

    QUALITY AUXILIARY OUTBOARD BRACKET -rise and fall - suits up to 15hp engines -stainless nylock nuts. -4 adjustment heights. -Fully warranted Excellent robust compact outboard bracket manufactured in quality marine grade stainless steel. Questions Welcome Any questions, please call us on 0064211844242 We pride our selves on bringing innovative quality Learn More
    USD$180.00
  9. Mercruiser Sterndrive Aluminium Oz Hydrofoil (Alpha 1 / Bravo 1)

    Mercruiser Sterndrive Aluminium Oz Hydrofoil (Alpha 1 / Bravo 1)

    MERCRUISER STERNDRIVE HYDROFOIL OZ HYDROFOIL


    Suits Mercruiser Sterndrive Models:

    - Alpha I, & Bravo 1 Legs All Years


    With our superior design Oz Hydrofoil you will:


    Eliminate - Cavitation/Ventilation


    Stop - Porpoising


    More - Trim Control, Stern & Bow lift


    Improve - Fuel economy, Stability & Tracking


    Plane - Faster & Easier at slower speeds



    BEST PERFORMING QUALITY HYDROFOIL ON THE MARKET!!


    KEY POINTS:

    -Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum

    -Stainless bolts and nuts included with Hydrofoil

    -Powder Coated Plate

    -Comes with easy full instructions

    -No Welding Needed

    -Easy Installation and Support

    -Fast and Affordable Shipping

    -Quality Tested and Approved


    BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!!

    Learn More
    USD$205.00
  10. Keel Guard 4 Feet Keel Protector Megaware (Boat Length- Up to 14 Feet)

    Keel Guard 4 Feet Keel Protector Megaware (Boat Length- Up to 14 Feet)

    SIZE KEEL GUARD: 4 FEET SUITS: BOATS UP TO 14 FEET SIZE /COLOR KEEL GUARD: Let us know which color you require. Keel Guard is available in many colors to match virtually any boat. All colors are UV-stabilized. Black, White, Red, Yellow, Grey, Lite Grey KEY POINTS: PROTECT AGAINIST ABRASIVE SAND, ROCKS, CONCRETE RAMPS & OYSTER BEDS ELIMINATE COSTLY REPAIRS ENJOY THE HIGHEST QUALITY AND SUPPERIOR ENGINEERING INCREASE THE VALUE OF YOUR BOAT MADE IN THE USA QUALITY 3M PRODUCT TYPICALLY, THE KEEL GUARD IS MOUNTED 4 TO 6 INCHES ABOVE THE WATERLINE ON THE BOW, ENDING 2 TO 3 FEET OR MORE BEYOND THE LOWEST POINT OF THE KEEL. KeelGuard Size Boat Length 4 Feet Up to 14 Feet 5 Feet Up to 16 Feet 6 Feet Up to 18 Feet 7 Feet Up to 20 Feet 8 Feet Up to 22 Feet 9 Feet Up to 24 Feet 10 Feet Up to 26 Feet 11 Feet Up to 28 Feet 12 Feet Up to 30 Feet The Keelguard instantly bonds to the hull using 3M’s super strong pressure sensitive adhesive, after application of the 3M primer. The bond is permanent, no curing time is necessary. KeelGuard has been protecting watercraft of all kinds, including PWCs, recreational boats, professional fishing boats, dinghies, RIBs, coast guard fleets and RNLI craft for years. Suitable both for the recreational user and commercial operations Lifetime Warranty Installation consists of four steps Step 1. Etching (Scuffing) Step 2. Cleaning Step 3. Priming Step 4. Applying Average installation time is 45-60 minutes depending on the length of KeelGuard. The KeelGuard kit comes complete with everything needed to professionally install the KeelGuard, except a cleaning agent used in step 2 However, the cleaning agent (acetone) is readily available at most hardware stores Learn More
    USD$207.00
  11. Keel Guard 5 Feet Keel Protector Megaware (Boat Length- Up to 16 Feet)

    Keel Guard 5 Feet Keel Protector Megaware (Boat Length- Up to 16 Feet)

    Keel Guard 5 Feet Keel Protector Megaware (Boat Length- Up to 16 Feet) SIZE /COLOR KEEL GUARD: Let us know which color you require. Keel Guard is available in many colors to match virtually any boat. All colors are UV-stabilized. Black, White, Red, Yellow, Grey, Lite Grey KEY POINTS: PROTECT AGAINIST ABRASIVE SAND, ROCKS, CONCRETE RAMPS & OYSTER BEDS ELIMINATE COSTLY REPAIRS ENJOY THE HIGHEST QUALITY AND SUPPERIOR ENGINEERING INCREASE THE VALUE OF YOUR BOAT MADE IN THE USA QUALITY 3M PRODUCT TYPICALLY, THE KEEL GUARD IS MOUNTED 4 TO 6 INCHES ABOVE THE WATERLINE ON THE BOW, ENDING 2 TO 3 FEET OR MORE BEYOND THE LOWEST POINT OF THE KEEL. KeelGuard Size Boat Length 4 Feet Up to 14 Feet 5 Feet Up to 16 Feet 6 Feet Up to 18 Feet 7 Feet Up to 20 Feet 8 Feet Up to 22 Feet 9 Feet Up to 24 Feet 10 Feet Up to 26 Feet 11 Feet Up to 28 Feet 12 Feet Up to 30 Feet The Keelguard instantly bonds to the hull using 3M’s super strong pressure sensitive adhesive, after application of the 3M primer. The bond is permanent, no curing time is necessary. KeelGuard has been protecting watercraft of all kinds, including PWCs, recreational boats, professional fishing boats, dinghies, RIBs, coast guard fleets and RNLI craft for years. Suitable both for the recreational user and commercial operations Lifetime Warranty Installation consists of four steps Step 1. Etching (Scuffing) Step 2. Cleaning Step 3. Priming Step 4. Applying Average installation time is 45-60 minutes depending on the length of KeelGuard. The KeelGuard kit comes complete with everything needed to professionally install the KeelGuard, except a cleaning agent used in step 2 However, the cleaning agent (acetone) is readily available at most hardware stores Learn More
    USD$225.00
  12. Keel Guard 6 Feet Keel Protector Megaware (Boat Length- Up to 18Feet)

    Keel Guard 6 Feet Keel Protector Megaware (Boat Length- Up to 18Feet)

    SIZE KEEL GUARD: 6 FEET (suits boats up to 18Feet) SIZE /COLOR KEEL GUARD: Let us know which color you require. Keel Guard is available in many colors to match virtually any boat. All colors are UV-stabilized. Black, White, Red, Yellow, Grey, Lite Grey KEY POINTS: PROTECT AGAINIST ABRASIVE SAND, ROCKS, CONCRETE RAMPS & OYSTER BEDS ELIMINATE COSTLY REPAIRS ENJOY THE HIGHEST QUALITY AND SUPPERIOR ENGINEERING INCREASE THE VALUE OF YOUR BOAT MADE IN THE USA QUALITY 3M PRODUCT TYPICALLY, THE KEEL GUARD IS MOUNTED 4 TO 6 INCHES ABOVE THE WATERLINE ON THE BOW, ENDING 2 TO 3 FEET OR MORE BEYOND THE LOWEST POINT OF THE KEEL. KeelGuard Size Boat Length 4 Feet Up to 14 Feet 5 Feet Up to 16 Feet 6 Feet Up to 18 Feet 7 Feet Up to 20 Feet 8 Feet Up to 22 Feet 9 Feet Up to 24 Feet 10 Feet Up to 26 Feet 11 Feet Up to 28 Feet 12 Feet Up to 30 Feet The Keelguard instantly bonds to the hull using 3M’s super strong pressure sensitive adhesive, after application of the 3M primer. The bond is permanent, no curing time is necessary. KeelGuard has been protecting watercraft of all kinds, including PWCs, recreational boats, professional fishing boats, dinghies, RIBs, coast guard fleets and RNLI craft for years. Suitable both for the recreational user and commercial operations Lifetime Warranty Installation consists of four steps Step 1. Etching (Scuffing) Step 2. Cleaning Step 3. Priming Step 4. Applying Average installation time is 45-60 minutes depending on the length of KeelGuard. The KeelGuard kit comes complete with everything needed to professionally install the KeelGuard, except a cleaning agent used in step 2 However, the cleaning agent (acetone) is readily available at most hardware stores Learn More
    USD$245.00
  13. Keel Guard 7 Feet Keel Protector Megaware (Boat Length- Up to 20 Feet)

    Keel Guard 7 Feet Keel Protector Megaware (Boat Length- Up to 20 Feet)

    Keel Guard 7 Feet Keel Protector Megaware (Boat Length- Up to 20 Feet) SIZE /COLOR KEEL GUARD: Let us know which color you require. Keel Guard is available in many colors to match virtually any boat. All colors are UV-stabilized. Black, White, Red, Yellow, Grey, Lite Grey KEY POINTS: PROTECT AGAINIST ABRASIVE SAND, ROCKS, CONCRETE RAMPS & OYSTER BEDS ELIMINATE COSTLY REPAIRS ENJOY THE HIGHEST QUALITY AND SUPPERIOR ENGINEERING INCREASE THE VALUE OF YOUR BOAT MADE IN THE USA QUALITY 3M PRODUCT TYPICALLY, THE KEEL GUARD IS MOUNTED 4 TO 6 INCHES ABOVE THE WATERLINE ON THE BOW, ENDING 2 TO 3 FEET OR MORE BEYOND THE LOWEST POINT OF THE KEEL. KeelGuard Size Boat Length 4 Feet Up to 14 Feet 5 Feet Up to 16 Feet 6 Feet Up to 18 Feet 7 Feet Up to 20 Feet 8 Feet Up to 22 Feet 9 Feet Up to 24 Feet 10 Feet Up to 26 Feet 11 Feet Up to 28 Feet 12 Feet Up to 30 Feet The Keelguard instantly bonds to the hull using 3M’s super strong pressure sensitive adhesive, after application of the 3M primer. The bond is permanent, no curing time is necessary. KeelGuard has been protecting watercraft of all kinds, including PWCs, recreational boats, professional fishing boats, dinghies, RIBs, coast guard fleets and RNLI craft for years. Suitable both for the recreational user and commercial operations Lifetime Warranty Installation consists of four steps Step 1. Etching (Scuffing) Step 2. Cleaning Step 3. Priming Step 4. Applying Average installation time is 45-60 minutes depending on the length of KeelGuard. The KeelGuard kit comes complete with everything needed to professionally install the KeelGuard, except a cleaning agent used in step 2 However, the cleaning agent (acetone) is readily available at most hardware stores Learn More
    USD$275.00
  14. Keel Guard 8 Feet Keel Protector Megaware (Boat Length- Up to 22 Feet)

    Keel Guard 8 Feet Keel Protector Megaware (Boat Length- Up to 22 Feet)

    Keel Guard 8 Feet Keel Protector Megaware (Boat Length- Up to 22 Feet) SIZE /COLOR KEEL GUARD: Let us know which color you require. Keel Guard is available in many colors to match virtually any boat. All colors are UV-stabilized. Black, White, Red, Yellow, Grey, Lite Grey KEY POINTS: PROTECT AGAINIST ABRASIVE SAND, ROCKS, CONCRETE RAMPS & OYSTER BEDS ELIMINATE COSTLY REPAIRS ENJOY THE HIGHEST QUALITY AND SUPPERIOR ENGINEERING INCREASE THE VALUE OF YOUR BOAT MADE IN THE USA QUALITY 3M PRODUCT TYPICALLY, THE KEEL GUARD IS MOUNTED 4 TO 6 INCHES ABOVE THE WATERLINE ON THE BOW, ENDING 2 TO 3 FEET OR MORE BEYOND THE LOWEST POINT OF THE KEEL. KeelGuard Size Boat Length 4 Feet Up to 14 Feet 5 Feet Up to 16 Feet 6 Feet Up to 18 Feet 7 Feet Up to 20 Feet 8 Feet Up to 22 Feet 9 Feet Up to 24 Feet 10 Feet Up to 26 Feet 11 Feet Up to 28 Feet 12 Feet Up to 30 Feet The Keelguard instantly bonds to the hull using 3M’s super strong pressure sensitive adhesive, after application of the 3M primer. The bond is permanent, no curing time is necessary. KeelGuard has been protecting watercraft of all kinds, including PWCs, recreational boats, professional fishing boats, dinghies, RIBs, coast guard fleets and RNLI craft for years. Suitable both for the recreational user and commercial operations Lifetime Warranty Installation consists of four steps Step 1. Etching (Scuffing) Step 2. Cleaning Step 3. Priming Step 4. Applying Average installation time is 45-60 minutes depending on the length of KeelGuard. The KeelGuard kit comes complete with everything needed to professionally install the KeelGuard, except a cleaning agent used in step 2 However, the cleaning agent (acetone) is readily available at most hardware stores Learn More
    USD$330.00
  15. Keel Guard 9 Feet Keel Protector Megaware (Boat Length- Up to 24 Feet)

    Keel Guard 9 Feet Keel Protector Megaware (Boat Length- Up to 24 Feet)

    Keel Guard 9 Feet Keel Protector Megaware (Boat Length- Up to 24 Feet) SIZE /COLOR KEEL GUARD: Let us know which color you require. Keel Guard is available in many colors to match virtually any boat. All colors are UV-stabilized. Black, White, Red, Yellow, Grey, Lite Grey KEY POINTS: PROTECT AGAINIST ABRASIVE SAND, ROCKS, CONCRETE RAMPS & OYSTER BEDS ELIMINATE COSTLY REPAIRS ENJOY THE HIGHEST QUALITY AND SUPPERIOR ENGINEERING INCREASE THE VALUE OF YOUR BOAT MADE IN THE USA QUALITY 3M PRODUCT TYPICALLY, THE KEEL GUARD IS MOUNTED 4 TO 6 INCHES ABOVE THE WATERLINE ON THE BOW, ENDING 2 TO 3 FEET OR MORE BEYOND THE LOWEST POINT OF THE KEEL. KeelGuard Size Boat Length 4 Feet Up to 14 Feet 5 Feet Up to 16 Feet 6 Feet Up to 18 Feet 7 Feet Up to 20 Feet 8 Feet Up to 22 Feet 9 Feet Up to 24 Feet 10 Feet Up to 26 Feet 11 Feet Up to 28 Feet 12 Feet Up to 30 Feet The Keelguard instantly bonds to the hull using 3M’s super strong pressure sensitive adhesive, after application of the 3M primer. The bond is permanent, no curing time is necessary. KeelGuard has been protecting watercraft of all kinds, including PWCs, recreational boats, professional fishing boats, dinghies, RIBs, coast guard fleets and RNLI craft for years. Suitable both for the recreational user and commercial operations Lifetime Warranty Installation consists of four steps Step 1. Etching (Scuffing) Step 2. Cleaning Step 3. Priming Step 4. Applying Average installation time is 45-60 minutes depending on the length of KeelGuard. The KeelGuard kit comes complete with everything needed to professionally install the KeelGuard, except a cleaning agent used in step 2 However, the cleaning agent (acetone) is readily available at most hardware stores Learn More
    USD$340.00

15 Item(s)

Grid  List