Oz-Hydrofoils
Buy Ozhydrofoil the worlds best performing Outboard Aluminium Hydrofoil and Sterndrive Hydrofoil on the Market
Eliminate cavitation problems by up to four times by increasing the size of the factory cavitation plate with an Oz Hydrofoil Outboard Hydrofoil. Marinepartsorder stocks a selection of Outboard Hydrofoils that reduce the chance for the propeller creating an air pocket- the cause of cavitation.
You’ll be able to improve fuel economy, as boats fitted with an Ozhydrofoil have more lift in the stern. The hull performs more efficiently when on the plane, as well as being able to plane at lower speeds. Improved efficiency results in fuel savings.
The worldwide outboard hydrofoil online retailer
It will help you improve rough water handling as they allow a lot more control of trim angles and the ability to eliminate porpoising, to plane at a lower speed.
An outboard hydrofoil gets boats onto the plane faster by forcing the water the propeller normally throws out the top, downwards plus rearward and gives more thrust lift.
Lowering planing speed by providing more lift, Outboard Hydrofoil Oz Hydrofoils enable boats to stay on the plane at lower speeds.
Browse our complete range of Hydrofoils below to find the correct model plate for your Outboard motor.
-
Mercruiser Sterndrive Hydrofoil to suit BRAVO 3 Leg
Quick Overview MERCRUISER STERNDRIVE HYDROFOIL OZ HYDROFOIL Suits Mercruiser Sterndrive Models: -Bravo 3 Legs All Years With our superior design Oz Hydrofoil you will: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds BEST PERFORMING QUALITY HYDROFOIL ON THE MARKET!! KEY POINTS: -Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum -Stainless bolts and nuts included with Hydrofoil -Powder Coated Plate -Comes with easy full instructions -No Welding Needed -Easy Installation and Support -Fast and Affordable Shipping -Quality Tested and Approved BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!! Learn MoreUSD$220.00 -
Mercruiser Sterndrive Hydrofoil to suit BRAVO 2 Leg
Quick Overview MERCRUISER STERNDRIVE HYDROFOIL OZ HYDROFOIL Suits Mercruiser Sterndrive Models: -Bravo 2 Legs All Years With our superior design Oz Hydrofoil you will: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds BEST PERFORMING QUALITY HYDROFOIL ON THE MARKET!! KEY POINTS: -Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum -Stainless bolts and nuts included with Hydrofoil -Powder Coated Plate -Comes with easy full instructions -No Welding Needed -Easy Installation and Support -Fast and Affordable Shipping -Quality Tested and Approved BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!! Learn MoreUSD$215.00 -
UNDER MOUNT Oz Hydrofoil MERCURY VERADO MOTORS 175HP TO 300HP (Suits boats over 21 feet or over 2.3 ton)
Quick Overview UNDER MOUNT VERADO OZ HYDROFOIL SUITS MERCURY VERADOS 175HP TO 300HP (Suits boats over 21 feet or over 2.3 ton) BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!! KEY POINTS: -Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum -Stainless bolts and nuts included with Hydrofoil -Powder Coated Plate -Comes with easy full instructions -No Welding Needed -Easy Installation and Support -Fast and Affordable Shipping -Quality Tested and Approved BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!! Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds Learn MoreUSD$215.00 -
Mercruiser Sterndrive Aluminium Oz Hydrofoil (Alpha 1 / Bravo 1)
MERCRUISER STERNDRIVE HYDROFOIL OZ HYDROFOIL
Learn More
Suits Mercruiser Sterndrive Models:
- Alpha I, & Bravo 1 Legs All Years
With our superior design Oz Hydrofoil you will:
Eliminate - Cavitation/Ventilation
Stop - Porpoising
More - Trim Control, Stern & Bow lift
Improve - Fuel economy, Stability & Tracking
Plane - Faster & Easier at slower speeds
BEST PERFORMING QUALITY HYDROFOIL ON THE MARKET!!
KEY POINTS:
-Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum
-Stainless bolts and nuts included with Hydrofoil
-Powder Coated Plate
-Comes with easy full instructions
-No Welding Needed
-Easy Installation and Support
-Fast and Affordable Shipping
-Quality Tested and Approved
BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!!USD$205.00 -
Evinrude E-Tec G2 Outboard Hydrofoil 150-300HP All Years
This Hydrofoil suits Evinrude G2 150-300HP Outboards Evinrude E-TEC G2 150HP-300HP - Suit all years PERMATRIM Key Points: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds Made of quality Marine Grade Aluminium-treated and Powder Coated Individually Designed to suit each Model Outboard Stainless Steel bolts, Nuts & Washers included with each Permatrim Hydrofoil Marine grade stainless steel fasteners Comes with easy Installation Instructions & Support No Welding Needed Proudly made in New Zealand Plus, Quality Tested and Approved! Well Proven Product, with Thousands Sold Color matched to suit your engine We have Permatrim Hydrofoils to suit all makes and models 3-350HP Learn MoreUSD$200.00 -
UNDER MOUNT Oz Hydrofoil MERCURY MARINER Outboards 150HP TO 300HP Excluding Verados (Suits boats over 21 feet or over 2.3 ton)
Quick Overview UNDER MOUNT Oz Hydrofoil MERCURY MARINER Outboards 150HP Through to 300HP Excluding Verados (We have a separate model Verado listing). (Suits boats over 21 feet or over 2.3 ton) BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!! KEY POINTS: -Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum -Stainless bolts and nuts included with Hydrofoil -Powder Coated Plate -Comes with easy full instructions -No Welding Needed -Easy Installation and Support -Fast and Affordable Shipping -Quality Tested and Approved BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!! Learn MoreUSD$185.00 -
Honda Outboard Hydrofoil Suits 135-150hp 2012 and Newer Outboards (Under Mount Oz Hydrofoil, suits boats over 21 feet or over 2.5 ton)
Quick Overview Suits Honda Outboard Motors 135 thru to 150 Horse Power Under Mount OZ HYDROFOIL (BEST SUITED ON BOATS Over 21 Feet or over 2.5 ton) Suits: 135hp 2012 and Newer 150hp 2012 and Newer With our superior design Oz Hydrofoil you will: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!! KEY POINTS: -Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum -Stainless bolts and nuts included with Hydrofoil -Powder Coated Plate -Comes with easy full instructions -No Welding Needed -Easy Installation and Support -Fast and Affordable Shipping -Quality Tested and Approved BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!! Learn MoreUSD$185.00 -
Honda Outboard Hydrofoil Suits 135-225hp (Under Mount Oz Hydrofoil, suits boats over 21 feet or over 2.5 ton)
Quick Overview Suits Honda Outboard Motors 135 thru to 225 Horse Power Under Mount OZ HYDROFOIL (BEST SUITED ON BOATS Over 21 Feet or over 2.5 ton) 135 HP 2004 thru to 2012 (We have another under Mount Oz Hydrofoil Listing for 2012 and Newer 135hp Honda's) 150 HP 2004 thru to 2012 (We have another under Mount Oz Hydrofoil Listing for 2012 and Newer 150hp Honda's) 200 HP 2003 and Newer 225 HP 2003 and Newer With our superior design Oz Hydrofoil you will: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!! KEY POINTS: -Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum -Stainless bolts and nuts included with Hydrofoil -Powder Coated Plate -Comes with easy full instructions -No Welding Needed -Easy Installation and Support -Fast and Affordable Shipping -Quality Tested and Approved BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!! Learn MoreUSD$185.00 -
Yamaha Outboard & Sterndrive Oz Hydrofoil Suits 150-300HP (Under Mount Oz Hydrofoil, suits boats over 21 feet or over 2.5 tonne)
Yamaha Out Board, and Yamaha Sterndrives Under Mount OZ HYDROFOIL (BEST SUITED ON BOATS OVER 21 Feet and OVER 2 tonnes)Suits Yamaha Outboard Motors and Outboard Sterndrives 150 thru to 300 Horse Power
Suits Yamaha Outboards Below: 150 2 Strokes 1986 & Newer F150 4 Strokes 2004 & Newer 175 2 Strokes 1984 & Newer F175 4 Strokes 2014 & Newer 200 2 Strokes 1984 & Newer 200 HP V MAX 2001 VF200 V MAX SHO 2010 & Newer F200 4 Strokes 2002 & Newer 220 HP (Special) 1984-1985 225 HP (Excel) 1987-1988 F225 4 Strokes 2002 & Newer VF225 V MAX SHO 2010 & Newer 225 2 Strokes1986 & Newer F225 4 Strokes Offshore 2010 & Newer F250 4 Strokes 2002 & Newer 250 2 Strokes1990 & Newer VF250 V MAX SHO 2010 & Newer F250 4 Strokes Offshore 2010 & Newer 250 V MAX 2001 & Newer 300 2 Strokes 2004-2007 F300 4 Strokes Offshore 2010 & Newer Yamaha Sterndrives 150HP upwards, single prop. all years NOTE - With any purchase please advise on the Make, Model and Year of your motor. To ensure the correct fit.
With our superior design Oz Hydrofoil you will:
Eliminate - Cavitation/Ventilation
Stop - Porpoising
More - Trim Control, Stern & Bow lift
Improve - Fuel economy, Stability & Tracking
Plane - Faster & Easier at slower speeds
BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!!
KEY POINTS:
-Proudly Manufactured in NEW ZEALAND from Quality Marine Grade Aluminum
-Stainless bolts and nuts included with Hydrofoil
-Gloss Powder Coated Plate
-Comes with easy full instructions
-No Welding Needed
-Easy Installation and Support
-Fast and Affordable Shipping
-Quality Tested and Approved
Learn More
Note: The Standard colored OzHydrofoil for Yamaha Outboards is GREY.
BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!!USD$170.00 -
Suzuki Outboard Hydrofoil Suits 150-300HP UNDER MOUNT (Suits boats over 21 feet or over 2.3 ton)
Quick Overview Suits Suzuki Outboard Motors 150 thru to 300 Horse Power 2 & 4 Stroke Engines in All Years Under Mount OZ HYDROFOIL (BEST SUITED ON BOATS Over 21 Feet or over 2.5 ton) DT 150 1986 & Newer DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987 & Newer DT 200 1986 & Newer DF 200 4-Stroke 2004 & Newer DT 225 1986 & Newer DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stoke All Years With our superior design Oz Hydrofoil you will: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!! KEY POINTS: -Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum -Stainless bolts and nuts included with Hydrofoil -Powder Coated Plate -Comes with easy full instructions -No Welding Needed -Easy Installation and Support -Fast and Affordable Shipping -Quality Tested and Approved BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!! Learn MoreUSD$165.00 -
Johnson Evinrude Outboard Oz-Hydrofoil Suits 150-300HP
JOHNSON EVINRUDE OUTBOARD HYDROFOIL OZ HYDROFOIL -Suits All Johnson Evinrude Outboard Motors 150 thru to 300 Horse Power -2 & 4 Stroke motors including Etecs NOTE - Does not fit Evinrude Motors G2 150HP and up. Please inquire. Oz Hydrofoil Performance Points: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds -Proudly Manufactured in Australasia from Quality strong Marine Grade Aluminium -Designed specifically to suit each model outboard -Stainless bolts, nuts & washers included with Hydrofoil -Oz Hydrofoil is bolted on-top of the outboard cavitation plate -Gloss Powder Coated Plate color matched to the outboard -Comes with easy installation instructions & support -No Welding Needed -Quality Tested and Approved -Well proven product with thousands sold worldwide -Best Performing Hydrofoil on the market guaranteed! -Gloss Black, Grey, White, Silver colors in stock Note: Let us know what color Oz Hydrofoil you want on the order details. If no message is sent regarding Hydrofoil color we will post the standard color. · If this Oz Hydrofoil listing does not cover your model outboard please see our other Oz Hydrofoil listings or advise us what model outboard you require a Hydrofoil for. Learn MoreUSD$155.00 -
Mercury Mariner Aluminium Outboard Hydrofoil Suits CT40-50-70-75-80-90-100-115-125-140HP- OZHYDROFOIL
Suits Mercury Mariner Outboards Below: 40 & 50 HP (Big Foot, 4-Stroke All Years) 40 HP Command Thrust 4 Stroke 2014 & Newer 40 HP Sea Pro 4-Stroke 2016 & Newer 50 HP Command Thrust 4 Stroke 2014 & Newer 60HP (Sea Pro/Marathon) 1995 & Newer 60 HP 4-Stroke / Bigfoot 1995 & Newer 60 HP Command Thrust 4 Stroke 2014 & Newer 60 HP Sea Pro 4-Stroke 2016 & Newer 70HP 2 Stroke 1987 – 1989 75HP 2 Stroke 1984 & Newer 75HP 4 Stroke 2001 & Newer 80HP 1978 – 1989 2 Stroke 80HP 4 Strokes 2015 & Newer 90HP 2 Stroke 1978 & Newer 90hp 4 Stroke 2001 & Newer (Not Command Thrust) 100HP 1988 & Newer 115HP 1978 & Newer 115HP 4-stroke 2001 & Newer 125HP 2 Stroke 1994 & Newer 140HP (Includes Sea Pro & Offshore) 1978 – 1981 650 2 Cyl thru 1971 800-850 6 cyl thru 1972 800-850 4 cyl 1972 – 1977 900-1500 Models thru 1977 80HP Mariner 1978 – 1983 Note: All model Motors above include EFI 2 & 4 Strokes Plus Optimax & Pro XS Engines Oz Hydrofoil Performance Points: Eliminate – Cavitation/Ventilation Stop – Porpoising More – Trim Control, Stern & Bow lift Improve – Fuel economy, Stability & Tracking Plane – Faster & Easier at slower speeds Proudly Manufactured in Australasia from Quality strong Marine Grade Aluminium Designed specifically to suit each model outboard Stainless bolts, nuts & washers included with Hydrofoil Oz Hydrofoil is bolted on-top of the outboard cavitation plate Gloss Powder Coated Plate colour matched to the outboard Comes with easy installation instructions & support No Welding Needed Quality Tested and Approved Well proven product with thousands sold worldwide Best Performing Hydrofoil on the market guaranteed! Gloss Black, Grey, White, Silver colours in stock BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!!
After you have made the purchase, please let us know the year and horse power of your motor. Learn MoreUSD$155.00 -
Johnson Evinrude Outboard Oz-Hydrofoil Suits 40-140HP
Suits Johnson Evinrude BRP Outboards Below: 2 Strokes: – 40hp (E-Tec) 2004 & Newer – 45hp (2cyl commercial) 1986 & Newer – 50hp (E -Tec) 2004 & Newer – 50hp (2cyl commercial) 1977-1979 – 50hp (2cyl) 1971-1974 – 50hp (3cyl) 1994 & Newer – 55hp (2cyl commercial) 1980 & Newer – 55hp (3cyl) 1968-1969 – 60hp (3cyl) 1970-71, 1986 & Newer – 60hp (E-Tec) 2004 & Newer – 65hp (3cyl commercial) 1984 & Newer – 65hp (3cyl) 1972-1973 – 70ho (3cyl) 1974 & Newer – 75hp (3cyl) 1975 -1984 – 75hp (E-Tec) 2004 & Newer – 85hp 1969 -1980, 1991-1985 – 88hp 1981-1996 – 90hp 1981 & Newer – 90hp (E-Tec) 2004 & Newer – 100hp 1979-1980, 1988-1993 – 110hp 1986-1989 – 112hp 1994-1996 – 115hp 1973 & Newer – 115hp (E-Tec) 2004 & Newer – 120hp 1986-1994 – 125hp 1971 -1972 – 130hp (E-Tec) 2004 & Newer – 135hp 1973-1976 – 140hp 1977-1994 4 Strokes: – 60hp 1998 & Newer – 70hp 1998 & Newer – 90hp 2003 & Newer – 115hp 2003 & Newer – 140hp 2003 & Newer Sterndrives: Model 400 – 2.3 L (120hp) thru 1991 – 2.5 L (120hp) 1978-1984 – 3.0 L (140hp) thru 1989 Cobra – 2.3 L (128hp) 1988-1991 – 2.5 L (120hp) 1985-1987 – 3.0 L (140hp) 1985-1987 Oz Hydrofoil Performance Points: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds -Proudly Manufactured in Australasia from Quality strong Marine Grade Aluminium -Designed specifically to suit each model outboard -Stainless bolts, nuts & washers included with Hydrofoil -Oz Hydrofoil is bolted on-top of the outboard cavitation plate -Gloss Powder Coated Plate color matched to the outboard -Comes with easy installation instructions & support -No Welding Needed -Quality Tested and Approved -Well proven product with thousands sold worldwide -Best Performing Hydrofoil on the market guaranteed! -Gloss Black, Grey, White, Silver colors in stock Note: Let us know what colour Oz Hydrofoil you want on the order details If no message is sent regarding Hydrofoil color we will post the standard color. - If this Oz Hydrofoil listing does not cover your model outboard please see our other Oz Hydrofoil listings or advise us what model outboard you require a Hydrofoil for. Learn MoreUSD$155.00 -
Mercury Mariner Aluminium Outboard Oz-Hydrofoil Suits 135-150-175-200-225-250-300HP
MERCURY MARINER OUTBOARD HYDROFOIL OZ HYDROFOIL
Suits Mercury Mariner Outboard Motors:
150 Thru to 300 Horse Power 2 & 4 Stroke Motors
Suits Mercury/Mariner V6 outboards 135-300hp: 135 HP 1987 and Newer 150 HP 1986 and Newer 150 HP (Four Stroke) 2004 and Newer 175 HP 1984 and Newer 200 HP 1984 and Newer 200 HP (VMAX) 2001 220 HP (Special) 1984-85 225 HP (Excel) 1987-88 225 HP 1986 and Newer 250 HP 1990 and Newer 250 HP (VMAX) 2001 F200 (Four Stroke) 2002 and Newer F225 (Four Stroke) 2002 and Newer 300 HP 2003 and Newer 300 HPDI 2004 and Newer
With our superior design Oz Hydrofoil you will:
Eliminate - Cavitation/Ventilation
Stop - Porpoising
More - Trim Control, Stern & Bow lift
Improve - Fuel economy, Stability & Tracking
Plane - Faster & Easier at slower speeds
BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!!
KEY POINTS:
-Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum
-Stainless bolts and nuts included with Hydrofoil
-Powder Coated Plate
-Comes with easy full instructions
-No Welding Needed
-Easy Installation and Support
-Fast and Affordable Shipping
-Quality Tested and ApprovedCOLOURS AVAILABLE- GREY , WHITE, BLACK or SILVER. Please choose your option below
Learn More
BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!!USD$155.00 -
Yamaha Outboard Aluminium Oz-Hydrofoil T50-T60-70-75-80-85-90-100-115-130-140 (15 tooth spline shaft models)
Suits Yamaha Outboards Below: : T50 HP 1996 & Newer T60 HP 2003 & Newer 60 HP (Includes C60/E60/P60) 1992-2005 70 4-Stroke 2010 & Newer 70 HP 2 Stroke 1984 & Newer 75 4-Stroke 2003 & Newer 75 HP (Includes C75/E75/P75) 1994-1999 80 HP 2 Stoke 1997 & Newer 80 4 Stroke 1999 & Newer 85 HP 2 Stroke 1991-1997 90 HP 2 Stroke (Includes C90) 1984 & Newer 90 4-Stroke 1999 & Newer 100 4-Stroke 1999 & Newer 115 4-Stroke 2000 & Newer 115 HP 2 Stroke(Includes C115/P115) 1984 & Newer 130 HP 2 Stroke 1984-2003 140 HP 2 Stroke All Years
With our superior design Oz Hydrofoil you will:
Eliminate - Cavitation/Ventilation
Stop - Porpoising
More - Trim Control, Stern & Bow lift
Improve - Fuel economy, Stability & Tracking
Plane - Faster & Easier at slower speeds
BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!!
KEY POINTS:
-Proudly Manufactured in NEW ZEALAND from Quality Marine Grade Aluminum
-Stainless bolts and nuts included with Hydrofoil
-Gloss Powder Coated Plate
-Comes with easy full instructions
-No Welding Needed
-Easy Installation and Support
-Fast and Affordable Shipping
-Quality Tested and ApprovedCOLORS AVAILABLE- GREY , WHITE, BLACK or SILVER. Please choose your option below
Learn More
Note: The Standard colored OzHydrofoil for Yamaha Outboards is GREY.
BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!!USD$150.00 -
Yamaha Outboard Hydrofoil Suits 150-300HP (Over Mount Oz Hydrofoil, suits boats under 21 feet or under 2.5 tonne)
Over Mount OZ HYDROFOIL (BEST SUITED ON BOATS UNDER 21 Feet and under 2.5 tonnes) Note: If your Boat is over 21 feet or over 2.5 tonnes please use our Under Mount Oz Hydrofoil listing)Suits Yamaha Outboard Motors 150 thru to 300 Horse Power
Suits Yamaha Outboards Below: 150 2 Strokes 1986 & Newer F150 4 Strokes 2004 & Newer 175 2 Strokes 1984 & Newer F175 4 Strokes 2014 & Newer 200 2 Strokes 1984 & Newer 200 HP V MAX 2001 VF200 V MAX SHO 2010 & Newer F200 4 Strokes 2002 & Newer 220 HP (Special) 1984-1985 225 HP (Excel) 1987-1988 F225 4 Strokes 2002 & Newer VF225 V MAX SHO 2010 & Newer 225 2 Strokes1986 & Newer F225 4 Strokes Offshore 2010 & Newer F250 4 Strokes 2002 & Newer 250 2 Strokes1990 & Newer VF250 V MAX SHO 2010 & Newer F250 4 Strokes Offshore 2010 & Newer 250 V MAX 2001 & Newer 300 2 Strokes 2004-2007 F300 4 Strokes Offshore 2010 & Newer
With our superior design Oz Hydrofoil you will:
Eliminate - Cavitation/Ventilation
Stop - Porpoising
More - Trim Control, Stern & Bow lift
Improve - Fuel economy, Stability & Tracking
Plane - Faster & Easier at slower speeds
BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!!
KEY POINTS:
-Proudly Manufactured in NEW ZEALAND from Quality Marine Grade Aluminum
-Stainless bolts and nuts included with Hydrofoil
-Gloss Powder Coated Plate
-Comes with easy full instructions
-No Welding Needed
-Easy Installation and Support
-Fast and Affordable Shipping
-Quality Tested and ApprovedCOLORS AVAILABLE - GREY , WHITE, BLACK or SILVER. Please choose your option below
Learn More
Note: The Standard colored OzHydrofoil for Yamaha Outboards is GREY.
BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!!USD$150.00 -
Tohatsu Outboard Oz-Hydrofoil Suits 70-140HP
Suits Tohatsu Outboard Motors 70 thru to 140 Horse Power
Learn More
Suits Tohatsu Outboards Below: 60C (Large Gearcase) Thru 1999 60 BFW 2014 & Newer 70C (Large Gearcase) Thru 2002 70 HP TLDI 2002-2009 75 HP TLDI 2010 & Newer 75 BFT 2014 & Newer 90 HP 1987-2001 90 HP TLDI 2001 & Newer 90 BFT 2014 & Newer 115 HP 1992-2001 115 HP TLDI 2004 & Newer 120 HP 1988-2003 140 HP 1988-2003
With our superior design Oz Hydrofoil you will:
Eliminate - Cavitation/Ventilation
Stop - Porpoising
More - Trim Control, Stern & Bow lift
Improve - Fuel economy, Stability & Tracking
Plane - Faster & Easier at slower speeds
BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!!
KEY POINTS:
-Proudly Manufactured in NEW ZEALAND from Quality Marine Grade Aluminum
-Stainless bolts and nuts included with Hydrofoil
-Gloss Powder Coated Plate
-Comes with easy full instructions
-No Welding Needed
-Easy Installation and Support
-Fast and Affordable Shipping
-Quality Tested and Approved
BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!!USD$140.00 -
Mercury Mariner Outboard Oz-Hydrofoil Suits 60-140HP - Silver
Mercury Mariner Outboard Hydrofoil- OZ HYDROFOIL
Suits Mercury Mariner Outboard Motors:
60 Thru to 140 Horse Power 2 & 4 Stroke Motors
Note:
* for the 60hp it fits only Big foot model (15 spline shaft)*
With our superior design Oz Hydrofoil you will:
Eliminate - Cavitation/Ventilation
Stop - Porpoising
More - Trim Control, Stern & Bow lift
Improve - Fuel economy, Stability & Tracking
Plane - Faster & Easier at slower speeds
BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!!
KEY POINTS:
-Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum
-Stainless bolts and nuts included with Hydrofoil
-Powder Coated Plate
-Comes with easy full instructions
-No Welding Needed
-Easy Installation and Support
-Fast and Affordable Shipping
-Quality Tested and ApprovedCOLOURS AVAILABLE- GREY, WHITE, BLACK or SILVER. Please choose your option below
Learn More
BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!!USD$130.00 -
Mercury Mariner Outboard Oz-Hydrofoil Suits 60-140HP - Black
Mercury Mariner Outboard Hydrofoil- OZ HYDROFOIL
Suits Mercury Mariner Outboard Motors:
60 Thru to 140 Horse Power 2 & 4 Stroke Motors
Note:
* for the 60hp it fits only Big foot model (15 spline shaft)*
With our superior design Oz Hydrofoil you will:
Eliminate - Cavitation/Ventilation
Stop - Porpoising
More - Trim Control, Stern & Bow lift
Improve - Fuel economy, Stability & Tracking
Plane - Faster & Easier at slower speeds
BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!!
KEY POINTS:
-Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum
-Stainless bolts and nuts included with Hydrofoil
-Powder Coated Plate
-Comes with easy full instructions
-No Welding Needed
-Easy Installation and Support
-Fast and Affordable Shipping
-Quality Tested and ApprovedCOLOURS AVAILABLE- GREY, WHITE, BLACK or SILVER. Please choose your option below
Learn More
BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!!USD$130.00 -
Honda Aluminium Outboard Oz-Hydrofoil BFP60-75-80-90-100-115-130hp
Suits Honda Outboard Motors 60hru to 130 Horse Power
Learn More
- BF60 (15 Spline model only) all years - BFP 60 (Power Thrust) 2009 & Newer - BF 75 1995 & Newer -BF 80 All Years - BF 90 1995 & Newer -BF 100 2016 and Newer - BF 115 1998 & Newer - BF 130 1998 & Newer
With our superior design Oz Hydrofoil you will:
Eliminate - Cavitation/Ventilation
Stop - Porpoising
More - Trim Control, Stern & Bow lift
Improve - Fuel economy, Stability & Tracking
Plane - Faster & Easier at slower speeds
BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!!
KEY POINTS:
-Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum
-Stainless bolts and nuts included with Hydrofoil
-Powder Coated Plate
-Comes with easy full instructions
-No Welding Needed
-Easy Installation and Support
-Fast and Affordable Shipping
-Quality Tested and Approved
BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!!USD$130.00
