Johnson Evinrude Skeg Guard, Replacement Skeg SKEGGARD suits 150-300hp Omc Outboards KEY POINTS: *Revamp your Johnson Evinrude Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of you Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ JOHNSON/EVINRUDE SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE -150-175-185-200-225 HP 2-Strokes 1986-2003 (Part#99008) -150-200 E-TEC (25" and 30" Shaft) 2-Strokes 2004 & Newer (Part#99023) -150-200 HP E-TEC (20" Shaft) 2-Strokes 2004 & Newer (Part#99008) -225-300 HP E-TEC All Models 2-Stroke 2004 & Newer (Part#99023) Does not fit HO Models WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR JOHNSON/EVINRUDE Learn More

Johnson Evinrude Skeg Guard, Replacement Skeg SKEGGARD suits 40-140hp Omc Outboards KEY POINTS: *Revamp your Johnson Evinrude Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ JOHNSON/EVINRUDE SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE - 40 & 50HP (by Suzuki) 4 Strokes 2001 Thru 2003 (Part#99034) - 60-70-90-115 & 140HP 4 Strokes 2001 & NEWER (Part#99026) --70hp Evinrude 1978 (Part#99010) - 75 Thru 130HP Etec (25" & 30" Shaft) 2 Strokes 2004 & NEWER (Part#99025) -75 Thru 115HP Etec (20" Shaft) 2 Strokes 2008 & NEWER (Part#99035) -90-100-115-120-140HP 2 Strokes 1980 Thru 2001 (Part#99010) WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR JOHNSON/EVINRUDE Learn More

Suzuki Skeg Guard, Replacement Skeg SKEGGARD suits DF 40-75hp Suzuki Outboards KEY POINTS: *Revamp your Suzuki Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ****EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!**** SUZUKI SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE 40-50-60-70hp DF 4 Strokes 2003 & NEWER (Part#99017) 13 spline / teeth only Learn More

Yamaha Skeg Guard, Replacement Skeg SkegGuard suits 150-350hp Yamaha Outboards KEY POINTS: *Revamp your Yamaha Outboard Skeg with this great looking SkegGuard in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard / Sterndrive Skeg to Install a Skeggard*
*Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs*
"Now there is a better and cheaper way to repair lower unit Skeg damage"
*Simply bolt on SkegGuard right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage*
*Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE*
*TAKES LESS THAN 5 MINUTES TO INSTALL*
************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************
YAMAHA SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE
-150hp 2 & 4 Stroke 1984 & NEWER (Part#27151)
-175-200-225-250hp 2 Stroke 1984 Thru 2002 (Part#27151)
-200-225-250-300hp 2 & 4 Stroke 2003 & NEWER (Part#27030)
-350HP 4 Stroke 2009 & NEWER (Part#27151)
WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR YAMAHA
Learn More

Yamaha Skeg Guard, Replacement Skeg SKEGGARD suits 40-140hp Yamaha Outboards KEY POINTS: *Revamp your Yamaha Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ YAMAHA SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE -40-48 & 50-85hp CV, 2 Stroke 1984 Thru 2000 (Part#99017) -40-50 & 60hp (13 Spline Shaft) 2 & 4 Stroke 2001 & NEWER (Part#99033) -60-70-90-100hp (15 Spline Shaft) 2 & 4 Stroke 1998 Thru 2001 (Part#99007) -60-70-80-90-100hp (15 Spline Shaft) 2002 and NEWER (Part#99032) 70-90hp 2 Stroke 1984 Thru 1998 (Part#99016) -115-130-140hp 2 Stroke 1984 Thru 2002 (Part#99015) -115-130-140hp 2 Stroke 2003 & NEWER (Part#99029) -115-130-140hp 4 Stroke 2000 & NEWER (Part#99029) WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR YAMAHA Learn More