Suits - 40HP PARSUN Outboard 2017 (13 Spline) KEY POINTS: *Revamp your Yamaha Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Skeg guard fits like a glove over both sides of your new or damaged skeg* *ONLY SKEG GUARD ON THE MARKET WITH A FOOTER FOR EXTRA PROTECTION & LONGER LIFE!! *Does NOT affect the performance* *Takes less than 5 minutes to install* ************EACH SKEG GUARD COMES WITH BOLTS, LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ Learn More

Force Skeg Guard, Replacement Skeg SKEGGARD suits 70-150hp Force Outboards KEY POINTS: *Revamp your Force Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your New or Damaged Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ FORCE SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE -70 and 75 HP 2-Stroke 1991-1997 (Part#99017) -70 and 90 HP (By Mercury) 2-Stroke 1998-2002 (Part#99007) -85 and 90 HP 2-Stroke 1988-1996 (Part#99018) -90-120-150 HP L-Drive 2-Stroke 1988-1991 (Part#99018) -120-125-150 HP 2-Stroke 1988-1996 (Part#99018) WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR FORCE OUTBOARD Learn More

Honda Skeg Guard, Replacment Skeg SKEGGARD suits 35-50hp Honda Outboards KEY POINTS: *Revamp your Honda Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ HONDA SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE -35-40-45-50 HP 4-Stroke 1991 and Newer (Part#99017) WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR HONDA OUTBOARD Learn More

Volvo Skeg Guard, Replacment Skeg SKEGGARD suits All Model Volvo Sterndrives KEY POINTS: *Revamp your Volvo Penta Sterndrive Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ VOLVO PENTA SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE -SX Drive (Single Prop) 1995-2006 (Part#99022) -DP Drive (Dual Prop) 1996-2007 (Part#99019) -SX and DP Drive 2007-2015 (Part#99020) WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR VOLVO STERNDRIVE Learn More

Johnson Evinrude Skeg Guard, Replacement Skeg SKEGGARD suits 150-300hp Omc Outboards KEY POINTS: *Revamp your Johnson Evinrude Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of you Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ JOHNSON/EVINRUDE SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE -150-175-185-200-225 HP 2-Strokes 1986-2003 (Part#99008) -150-200 E-TEC (25" and 30" Shaft) 2-Strokes 2004 & Newer (Part#99023) -150-200 HP E-TEC (20" Shaft) 2-Strokes 2004 & Newer (Part#99008) -225-300 HP E-TEC All Models 2-Stroke 2004 & Newer (Part#99023) Does not fit HO Models WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR JOHNSON/EVINRUDE Learn More

Johnson Evinrude Skeg Guard, Replacement Skeg SKEGGARD suits 40-140hp Omc Outboards KEY POINTS: *Revamp your Johnson Evinrude Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ JOHNSON/EVINRUDE SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE - 40 & 50HP (by Suzuki) 4 Strokes 2001 Thru 2003 (Part#99034) - 60-70-90-115 & 140HP 4 Strokes 2001 & NEWER (Part#99026) --70hp Evinrude 1978 (Part#99010) - 75 Thru 130HP Etec (25" & 30" Shaft) 2 Strokes 2004 & NEWER (Part#99025) -75 Thru 115HP Etec (20" Shaft) 2 Strokes 2008 & NEWER (Part#99035) -90-100-115-120-140HP 2 Strokes 1980 Thru 2001 (Part#99010) WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR JOHNSON/EVINRUDE Learn More

Suzuki Skeg Guard, Replacement Skeg SKEGGARD suits DF 40-75hp Suzuki Outboards KEY POINTS: *Revamp your Suzuki Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ****EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!**** SUZUKI SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE 40-50-60-70hp DF 4 Strokes 2003 & NEWER (Part#99017) 13 spline / teeth only Learn More

Yamaha Skeg Guard, Replacement Skeg SkegGuard suits 150-350hp Yamaha Outboards KEY POINTS: *Revamp your Yamaha Outboard Skeg with this great looking SkegGuard in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard / Sterndrive Skeg to Install a Skeggard*
*Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs*
"Now there is a better and cheaper way to repair lower unit Skeg damage"
*Simply bolt on SkegGuard right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage*
*Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE*
*TAKES LESS THAN 5 MINUTES TO INSTALL*
************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************
YAMAHA SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE
-150hp 2 & 4 Stroke 1984 & NEWER (Part#27151)
-175-200-225-250hp 2 Stroke 1984 Thru 2002 (Part#27151)
-200-225-250-300hp 2 & 4 Stroke 2003 & NEWER (Part#27030)
-350HP 4 Stroke 2009 & NEWER (Part#27151)
WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR YAMAHA
Learn More

Yamaha Skeg Guard, Replacement Skeg SKEGGARD suits 40-140hp Yamaha Outboards KEY POINTS: *Revamp your Yamaha Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ YAMAHA SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE -40-48 & 50-85hp CV, 2 Stroke 1984 Thru 2000 (Part#99017) -40-50 & 60hp (13 Spline Shaft) 2 & 4 Stroke 2001 & NEWER (Part#99033) -60-70-90-100hp (15 Spline Shaft) 2 & 4 Stroke 1998 Thru 2001 (Part#99007) -60-70-80-90-100hp (15 Spline Shaft) 2002 and NEWER (Part#99032) 70-90hp 2 Stroke 1984 Thru 1998 (Part#99016) -115-130-140hp 2 Stroke 1984 Thru 2002 (Part#99015) -115-130-140hp 2 Stroke 2003 & NEWER (Part#99029) -115-130-140hp 4 Stroke 2000 & NEWER (Part#99029) WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR YAMAHA Learn More