Mercury Skeg Guard, Replacement Skeg SKEGGARD suits 40-70hp Mercury Mariner KEY POINTS: *Revamp your Mercury/Mariner Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ MERCURY/MARINER SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE - 40-50-60-65-70 HP 2 Stroke 1980 Thru 1985 (Part#99016) - 40-50-60 HP 2 Stroke 1986 Thru 2002 (Part#99017) - 40-50-60 HP 2 & 4 Stroke 2003 & NEWER(Part#99034) - 50-60 HP (BIG FOOT Models) 2 & 4 Stroke 2003 & NEWER (Part#99007) - 60 HP Command Thrust, 2015 and NEWER (Part#99007) WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR MERCURY/MARINER Learn More

Yamaha Skeg Guard, Replacement Skeg SKEGGARD suits 40-140hp Yamaha Outboards KEY POINTS: *Revamp your Yamaha Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ YAMAHA SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE -40-48 & 50-85hp CV, 2 Stroke 1984 Thru 2000 (Part#99017) -40-50 & 60hp (13 Spline Shaft) 2 & 4 Stroke 2001 & NEWER (Part#99033) -60-70-90-100hp (15 Spline Shaft) 2 & 4 Stroke 1998 Thru 2001 (Part#99007) -60-70-80-90-100hp (15 Spline Shaft) 2002 and NEWER (Part#99032) 70-90hp 2 Stroke 1984 Thru 1998 (Part#99016) -115-130-140hp 2 Stroke 1984 Thru 2002 (Part#99015) -115-130-140hp 2 Stroke 2003 & NEWER (Part#99029) -115-130-140hp 4 Stroke 2000 & NEWER (Part#99029) WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR YAMAHA Learn More

Yamaha Skeg Guard, Replacement Skeg SkegGuard suits 150-350hp Yamaha Outboards KEY POINTS: *Revamp your Yamaha Outboard Skeg with this great looking SkegGuard in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard / Sterndrive Skeg to Install a Skeggard*
*Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs*
"Now there is a better and cheaper way to repair lower unit Skeg damage"
*Simply bolt on SkegGuard right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage*
*Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE*
*TAKES LESS THAN 5 MINUTES TO INSTALL*
************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************
YAMAHA SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE
-150hp 2 & 4 Stroke 1984 & NEWER (Part#27151)
-175-200-225-250hp 2 Stroke 1984 Thru 2002 (Part#27151)
-200-225-250-300hp 2 & 4 Stroke 2003 & NEWER (Part#27030)
-350HP 4 Stroke 2009 & NEWER (Part#27151)
WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR YAMAHA
Learn More

Suzuki Skeg Guard, Replacement Skeg SKEGGARD suits DF 40-75hp Suzuki Outboards KEY POINTS: *Revamp your Suzuki Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ****EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!**** SUZUKI SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE 40-50-60-70hp DF 4 Strokes 2003 & NEWER (Part#99017) 13 spline / teeth only Learn More

Johnson Evinrude Skeg Guard, Replacement Skeg SKEGGARD suits 40-140hp Omc Outboards KEY POINTS: *Revamp your Johnson Evinrude Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ JOHNSON/EVINRUDE SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE - 40 & 50HP (by Suzuki) 4 Strokes 2001 Thru 2003 (Part#99034) - 60-70-90-115 & 140HP 4 Strokes 2001 & NEWER (Part#99026) --70hp Evinrude 1978 (Part#99010) - 75 Thru 130HP Etec (25" & 30" Shaft) 2 Strokes 2004 & NEWER (Part#99025) -75 Thru 115HP Etec (20" Shaft) 2 Strokes 2008 & NEWER (Part#99035) -90-100-115-120-140HP 2 Strokes 1980 Thru 2001 (Part#99010) WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR JOHNSON/EVINRUDE Learn More

Johnson Evinrude Skeg Guard, Replacement Skeg SKEGGARD suits 150-300hp Omc Outboards KEY POINTS: *Revamp your Johnson Evinrude Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of you Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ JOHNSON/EVINRUDE SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE -150-175-185-200-225 HP 2-Strokes 1986-2003 (Part#99008) -150-200 E-TEC (25" and 30" Shaft) 2-Strokes 2004 & Newer (Part#99023) -150-200 HP E-TEC (20" Shaft) 2-Strokes 2004 & Newer (Part#99008) -225-300 HP E-TEC All Models 2-Stroke 2004 & Newer (Part#99023) Does not fit HO Models WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR JOHNSON/EVINRUDE Learn More

Honda Skeg Guard, Replacment Skeg SKEGGARD suits 35-50hp Honda Outboards KEY POINTS: *Revamp your Honda Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ HONDA SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE -35-40-45-50 HP 4-Stroke 1991 and Newer (Part#99017) WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR HONDA OUTBOARD Learn More

Force Skeg Guard, Replacement Skeg SKEGGARD suits 70-150hp Force Outboards KEY POINTS: *Revamp your Force Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your New or Damaged Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ FORCE SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE -70 and 75 HP 2-Stroke 1991-1997 (Part#99017) -70 and 90 HP (By Mercury) 2-Stroke 1998-2002 (Part#99007) -85 and 90 HP 2-Stroke 1988-1996 (Part#99018) -90-120-150 HP L-Drive 2-Stroke 1988-1991 (Part#99018) -120-125-150 HP 2-Stroke 1988-1996 (Part#99018) WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR FORCE OUTBOARD Learn More

Yamaha Out Board, and Yamaha Sterndrives Under Mount OZ HYDROFOIL (BEST SUITED ON BOATS OVER 21 Feet and OVER 2 tonnes)

Suits Yamaha Outboard Motors and Outboard Sterndrives 150 thru to 300 Horse Power
Suits Yamaha Outboards Below: 150 2 Strokes 1986 & Newer F150 4 Strokes 2004 & Newer 175 2 Strokes 1984 & Newer F175 4 Strokes 2014 & Newer 200 2 Strokes 1984 & Newer 200 HP V MAX 2001 VF200 V MAX SHO 2010 & Newer F200 4 Strokes 2002 & Newer 220 HP (Special) 1984-1985 225 HP (Excel) 1987-1988 F225 4 Strokes 2002 & Newer VF225 V MAX SHO 2010 & Newer 225 2 Strokes1986 & Newer F225 4 Strokes Offshore 2010 & Newer F250 4 Strokes 2002 & Newer 250 2 Strokes1990 & Newer VF250 V MAX SHO 2010 & Newer F250 4 Strokes Offshore 2010 & Newer 250 V MAX 2001 & Newer 300 2 Strokes 2004-2007 F300 4 Strokes Offshore 2010 & Newer Yamaha Sterndrives 150HP upwards, single prop. all years NOTE - With any purchase please advise on the Make, Model and Year of your motor. To ensure the correct fit.

With our superior design Oz Hydrofoil you will:

Eliminate - Cavitation/Ventilation


Stop - Porpoising


More - Trim Control, Stern & Bow lift


Improve - Fuel economy, Stability & Tracking


Plane - Faster & Easier at slower speeds


BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!!


KEY POINTS:

-Proudly Manufactured in NEW ZEALAND from Quality Marine Grade Aluminum

-Stainless bolts and nuts included with Hydrofoil

-Gloss Powder Coated Plate

-Comes with easy full instructions

-No Welding Needed

-Easy Installation and Support

-Fast and Affordable Shipping

-Quality Tested and Approved

Note: The Standard colored OzHydrofoil for Yamaha Outboards is GREY.

BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!!

Learn More

QUALITY AUXILIARY OUTBOARD BRACKET -rise and fall - suits up to 15hp engines -stainless nylock nuts. -4 adjustment heights. -Fully warranted Excellent robust compact outboard bracket manufactured in quality marine grade stainless steel. Questions Welcome Any questions, please call us on 0064211844242 We pride our selves on bringing innovative quality Learn More

Quick Overview UNDER MOUNT Oz Hydrofoil MERCURY MARINER Outboards 150HP Through to 300HP Excluding Verados (We have a separate model Verado listing). (Suits boats over 21 feet or over 2.3 ton) BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!! KEY POINTS: -Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum -Stainless bolts and nuts included with Hydrofoil -Powder Coated Plate -Comes with easy full instructions -No Welding Needed -Easy Installation and Support -Fast and Affordable Shipping -Quality Tested and Approved BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!! Learn More

Quick Overview UNDER MOUNT VERADO OZ HYDROFOIL SUITS MERCURY VERADOS 175HP TO 300HP (Suits boats over 21 feet or over 2.3 ton) BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!! KEY POINTS: -Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum -Stainless bolts and nuts included with Hydrofoil -Powder Coated Plate -Comes with easy full instructions -No Welding Needed -Easy Installation and Support -Fast and Affordable Shipping -Quality Tested and Approved BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!! Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds Learn More

Quick Overview MERCRUISER STERNDRIVE HYDROFOIL OZ HYDROFOIL Suits Mercruiser Sterndrive Models: -Bravo 2 Legs All Years With our superior design Oz Hydrofoil you will: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds BEST PERFORMING QUALITY HYDROFOIL ON THE MARKET!! KEY POINTS: -Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum -Stainless bolts and nuts included with Hydrofoil -Powder Coated Plate -Comes with easy full instructions -No Welding Needed -Easy Installation and Support -Fast and Affordable Shipping -Quality Tested and Approved BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!! Mercruiser Sterndrive Aluminium Learn More

Quick Overview MERCRUISER STERNDRIVE HYDROFOIL OZ HYDROFOIL Suits Mercruiser Sterndrive Models: -Bravo 3 Legs All Years With our superior design Oz Hydrofoil you will: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds BEST PERFORMING QUALITY HYDROFOIL ON THE MARKET!! KEY POINTS: -Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum -Stainless bolts and nuts included with Hydrofoil -Powder Coated Plate -Comes with easy full instructions -No Welding Needed -Easy Installation and Support -Fast and Affordable Shipping -Quality Tested and Approved BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!! Mercruiser Sterndrive Aluminium Learn More

Quick Overview Suits Suzuki Outboard Motors 150 thru to 300 Horse Power 2 & 4 Stroke Engines in All Years Under Mount OZ HYDROFOIL (BEST SUITED ON BOATS Over 21 Feet or over 2.5 ton) DT 150 1986 & Newer DF 150 4-Stroke 2006 & Newer DF 175 4-Stroke 2006 & Newer DT 175 1987 & Newer DT 200 1986 & Newer DF 200 4-Stroke 2004 & Newer DT 225 1986 & Newer DF 225 4-Stroke 2004 & Newer DF 250 4-Stroke 2004 & Newer DF 300 4-Stoke All Years With our superior design Oz Hydrofoil you will: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!! KEY POINTS: -Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum -Stainless bolts and nuts included with Hydrofoil -Powder Coated Plate -Comes with easy full instructions -No Welding Needed -Easy Installation and Support -Fast and Affordable Shipping -Quality Tested and Approved BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!! Learn More

Quick Overview Suits Honda Outboard Motors 135 thru to 150 Horse Power Under Mount OZ HYDROFOIL (BEST SUITED ON BOATS Over 21 Feet or over 2.5 ton) Suits: 135hp 2012 and Newer 150hp 2012 and Newer With our superior design Oz Hydrofoil you will: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!! KEY POINTS: -Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum -Stainless bolts and nuts included with Hydrofoil -Powder Coated Plate -Comes with easy full instructions -No Welding Needed -Easy Installation and Support -Fast and Affordable Shipping -Quality Tested and Approved BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!! Learn More

Quick Overview Suits Honda Outboard Motors 135 thru to 225 Horse Power Under Mount OZ HYDROFOIL (BEST SUITED ON BOATS Over 21 Feet or over 2.5 ton) 135 HP 2004 thru to 2012 (We have another under Mount Oz Hydrofoil Listing for 2012 and Newer 135hp Honda's) 150 HP 2004 thru to 2012 (We have another under Mount Oz Hydrofoil Listing for 2012 and Newer 150hp Honda's) 200 HP 2003 and Newer 225 HP 2003 and Newer With our superior design Oz Hydrofoil you will: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds BEST PERFORMING QUALITY OUTBOARD HYDROFOIL ON THE MARKET!! KEY POINTS: -Proudly Manufactured in AUSTRALASIA from Quality Marine Grade Aluminum -Stainless bolts and nuts included with Hydrofoil -Powder Coated Plate -Comes with easy full instructions -No Welding Needed -Easy Installation and Support -Fast and Affordable Shipping -Quality Tested and Approved BUY WITH CONFIDENCE KNOWING THE QUALITY AND PERFORMANCE OF THIS OZ HYDROFOIL IS GUARANTEED!! Learn More

Keel Guard 7 Feet Keel Protector Megaware (Boat Length- Up to 20 Feet) SIZE /COLOR KEEL GUARD: Let us know which color you require. Keel Guard is available in many colors to match virtually any boat. All colors are UV-stabilized. Black, White, Red, Yellow, Grey, Lite Grey KEY POINTS: PROTECT AGAINIST ABRASIVE SAND, ROCKS, CONCRETE RAMPS & OYSTER BEDS ELIMINATE COSTLY REPAIRS ENJOY THE HIGHEST QUALITY AND SUPPERIOR ENGINEERING INCREASE THE VALUE OF YOUR BOAT MADE IN THE USA QUALITY 3M PRODUCT TYPICALLY, THE KEEL GUARD IS MOUNTED 4 TO 6 INCHES ABOVE THE WATERLINE ON THE BOW, ENDING 2 TO 3 FEET OR MORE BEYOND THE LOWEST POINT OF THE KEEL. KeelGuard Size Boat Length 4 Feet Up to 14 Feet 5 Feet Up to 16 Feet 6 Feet Up to 18 Feet 7 Feet Up to 20 Feet 8 Feet Up to 22 Feet 9 Feet Up to 24 Feet 10 Feet Up to 26 Feet 11 Feet Up to 28 Feet 12 Feet Up to 30 Feet The Keelguard instantly bonds to the hull using 3M’s super strong pressure sensitive adhesive, after application of the 3M primer. The bond is permanent, no curing time is necessary. KeelGuard has been protecting watercraft of all kinds, including PWCs, recreational boats, professional fishing boats, dinghies, RIBs, coast guard fleets and RNLI craft for years. Suitable both for the recreational user and commercial operations Lifetime Warranty Installation consists of four steps Step 1. Etching (Scuffing) Step 2. Cleaning Step 3. Priming Step 4. Applying Average installation time is 45-60 minutes depending on the length of KeelGuard. The KeelGuard kit comes complete with everything needed to professionally install the KeelGuard, except a cleaning agent used in step 2 However, the cleaning agent (acetone) is readily available at most hardware stores Learn More

Suzuki Permatrim Hydrofoil - Black Suits - 4, 5 & 6hp (2 or 4 Strokes ALL YEARS) When making a purchase, please let us know the Make, Model and Year of your Motor. OZHYRDROFOIL Key Points: Eliminate - Cavitation/Ventilation Stop - Porpoising More - Trim Control, Stern & Bow lift Improve - Fuel economy, Stability & Tracking Plane - Faster & Easier at slower speeds Made of quality Marine Grade Aluminium Individually Designed to suit each Model Outboard Stainless Steel bolts, Nuts & Washers included with each OzHydrofoil is bolted on-top of the outboard Cavitation plate Gloss Powder Coated Plate Colour matched to each Outboard Comes with easy Installation Instructions & Support No Welding Needed Proudly made in New Zealand Plus, Quality Tested and Approved! Well Proven Product, with Thousands Sold Learn More